As fall temperatures settle in across the Tri-Cities, homeowners start preparing their homes for the colder months ahead. While checking the furnace and sealing up drafty windows may be on your list, your plumbing deserves some attention too.
Plumbing leaks can develop in places that are easy to overlook, and a small leak can cause water damage long before it becomes obvious. Some leaks produce a visible drip, while others may show up as a damp cabinet, unexplained water stain, musty odor, or sound of running water when everything in the house is turned off.
Fall is a good time to check these commonly overlooked areas. Finding and repairing plumbing leaks before winter can help protect your home and prevent a small plumbing problem from becoming a much larger repair.
1. Check Under Your Kitchen and Bathroom Sinks

The cabinets beneath sinks are one of the easiest places for plumbing leaks to go unnoticed.
Take a few minutes to look underneath each sink and check around the supply lines, shutoff valves, drain connections, and other fittings. Look for moisture, water stains, corrosion, or a small amount of standing water inside the cabinet.
A slow leak may not create an obvious puddle. Instead, you might notice swollen cabinet material, discoloration, or a musty smell.
The EPA recommends checking underneath sinks for pooling water and signs of corrosion around plumbing connections as part of a household leak inspection.
While you’re checking, run the faucet for a minute and watch the connections underneath. Some plumbing leaks only become noticeable when water is actively flowing through the fixture.
2. Look Around Toilets
Toilets can develop plumbing leaks in several different places, and not all of them are visible.
Check around the base of the toilet for moisture or discoloration. You should also pay attention to whether the toilet seems to run periodically when nobody has flushed it.
A toilet that runs on its own may have an issue with the flapper, fill valve, or another component inside the tank. Even though the water may not end up on your bathroom floor, it is still wasted water and a sign that the fixture needs attention.
The EPA’s leak-detection guidance specifically recommends listening for running toilets and checking toilet components for leaks.
If you notice a toilet that constantly runs, periodically refills, or leaves moisture around the base, don’t assume it is harmless. Small plumbing leaks around a toilet can eventually damage flooring or the surrounding subfloor.
3. Check Faucets and Shower Fixtures

A dripping faucet may seem like a minor annoyance, but it can be one of the most obvious signs of plumbing leaks in your home.
Check bathroom and kitchen faucets for steady drips after the water has been turned off. Look around the base of the faucet as well as underneath the sink.
Showerheads and tub fixtures deserve attention too. A showerhead that continues dripping after the water is shut off may have a worn component or connection that needs repair.
The EPA notes that worn fixtures, loose connections, and other plumbing components can contribute to household leaks.
Before winter arrives, check these fixtures while you are already doing other seasonal home maintenance. Replacing a worn washer, seal, or fixture can be much simpler than dealing with the water damage caused by an ignored leak.
4. Inspect Your Water Heater
Your water heater is another area where plumbing leaks can develop, particularly as equipment and connections age.
Look around the base of the water heater for moisture, puddling, rust, or signs of corrosion. Check the connections at the top of the tank as well, but do not attempt to adjust components or valves you are unfamiliar with.
A small amount of moisture around a connection may indicate a plumbing issue, while water coming from the tank itself can indicate a more serious problem.
Water heater leaks can become particularly disruptive if they go unnoticed for an extended period. Because water heaters hold a substantial amount of water, a failed tank or connection can release much more water than a typical fixture leak.
If you notice moisture around your water heater, it is worth having a professional determine where the water is coming from and whether the equipment can be repaired or needs to be replaced.
5. Check Exposed Pipes in Basements and Crawl Spaces
Not all plumbing leaks occur around fixtures. Pipes running through basements, crawl spaces, garages, and other less frequently visited areas can develop leaks without anyone noticing right away.
Take a look at exposed plumbing and watch for:
- Water droplets or damp spots
- Rust or corrosion
- Discoloration around fittings
- Mineral buildup
- Wet insulation
- Musty odors
- Unexplained moisture on floors or walls
These areas are especially worth checking before winter because temperature changes can place additional stress on vulnerable plumbing.
You do not need to inspect every inch of your plumbing system yourself. The goal is simply to notice anything that looks different from normal and have questionable areas evaluated before they become a larger problem.
6. Pay Attention to Your Water Pressure

Changes in water pressure can sometimes point to plumbing leaks, particularly when the change is unexplained or occurs alongside other warning signs.
If your water pressure suddenly seems weaker than usual, don’t automatically assume the issue is with the municipal water supply. A leak somewhere in your plumbing system can affect water pressure, although there are many other possible causes as well.
Pay attention to whether the pressure change affects the entire house or only one fixture. Also listen for water running when all faucets and appliances are turned off.
This is especially important if you have noticed other symptoms, such as damp areas, unexplained increases in water usage, or recurring plumbing problems.
If you’re unsure whether a pressure change is connected to a leak, a professional plumber can test the system and help identify the source.
7. Check Your Yard and Outdoor Plumbing
Some plumbing leaks happen outside the house, where they can be even harder to notice.
Walk around your property and look at outdoor faucets, hose connections, irrigation components, and visible water lines. Watch for unusually wet areas, puddles, muddy spots, or areas of grass that seem greener than the surrounding lawn without an obvious explanation.
An outdoor leak may be particularly easy to overlook during the fall because homeowners naturally spend less time outside as temperatures cool.
This is also a good time to disconnect garden hoses and inspect outdoor faucets before colder weather arrives. Addressing an existing leak now can help prevent additional plumbing problems as temperatures fluctuate.
Other Signs of Plumbing Leaks to Watch For
You don’t always have to see water to know that plumbing leaks may be present.

Keep an eye out for other warning signs throughout your home, including:
- An unexplained increase in your water bill
- The sound of running water when fixtures are off
- Damp walls, ceilings, or flooring
- Bubbling or peeling paint
- Musty or mildew-like odors
- Mold growth
- Low water pressure
- Water stains around plumbing fixtures
- Puddles or unexplained wet spots outside
The EPA’s WaterSense program provides additional guidance on identifying household leaks and understanding how even small leaks can contribute to wasted water.
If you notice several of these signs at the same time, don’t wait for a visible pipe failure before investigating.
Why Fall Is a Good Time to Look for Plumbing Leaks
Checking for plumbing leaks before winter gives you an opportunity to address problems while they are still relatively manageable.
Once colder weather arrives, plumbing problems can become more complicated. Exposed plumbing may be affected by freezing temperatures, outdoor fixtures may become more vulnerable, and a small existing leak can create additional problems if conditions change.
Fall also tends to be a convenient time for homeowners to take care of maintenance tasks before the holidays and colder weather arrive.
A few minutes spent checking under sinks, around toilets, near the water heater, and in accessible areas of your home can help you catch warning signs early.
When Should You Call a Plumber?
Some plumbing leaks are simple enough for a homeowner to identify, but determining where a hidden leak is coming from can be much more difficult.

Call a professional plumber if you notice unexplained moisture, a persistent drop in water pressure, water stains that continue to grow, or the sound of water running when every fixture is turned off.
Professional leak detection can also be important when the suspected leak is behind a wall, underneath flooring, beneath a slab, or somewhere else that cannot be visually inspected.
Steve Huff Plumbing, Heating & Air provides leak detection and repair services throughout the Tri-Cities. Their plumbers can identify visible and hidden leaks, including pipe leaks, fixture leaks, and slab or underground leaks.
Addressing plumbing leaks early can help limit water damage and prevent a small problem from turning into a much more expensive repair.
Check for Plumbing Leaks Before Winter Arrives
Plumbing leaks aren’t always dramatic. Sometimes the first sign is a small drip, a damp cabinet, a water stain, or a toilet that seems to run when no one has used it.
Before colder weather arrives, take a few minutes to check the areas where leaks commonly develop. Look under sinks, around toilets and faucets, near your water heater, along accessible pipes, and around outdoor plumbing.
If something doesn’t look or sound right, it’s better to have it checked now than discover a much larger problem later.
Steve Huff Plumbing, Heating & Air can help locate and repair plumbing leaks throughout the Tri-Cities, giving you one less plumbing concern to worry about as winter approaches.
